Black plate (8,1)Cadillac DTS Owner Manual - 2011Memory FeaturesOn vehicles with the memory feature, the controls onthe driver door are used to program and recall memorysettings for the driver seat, outside mirrors, and thesteering wheel position, if the vehicle has the power tiltwheel and telescopic steering feature.Storing Memory PositionsTo save into memory:1. Adjust the driver seat, including the seatbackrecliner and lumbar, both outside mirrors, and thesteering column.2. Press and hold “1” until two beeps sound.3. Repeat for a second driver position using “2.”To recall the memory positions, press and release “1”or “2.” The vehicle must be in P (Park). A single beepwill sound. The seat, outside mirrors, and steeringwheel will move to the position previously stored for theidentified driver.See Memory Seat, Mirrors and Steering Wheel onpage 2‑6 for more information.Easy Exit Driver SeatThe easy exit driver seat feature can move the seatrearward and the power steering column, if equipped,up and forward to allow extra room to exit the vehicle.S : Press to recall the easy exit seat position. Thevehicle must be in P (Park).A single beep sounds. The driver seat will moveback, and if the vehicle has the power tilt wheel andtelescopic steering feature, the power telescopicsteering column will move up and forward.See Memory Seat, Mirrors and Steering Wheel onpage 2‑6 and “Easy Exit Recall” and “Easy Exit Setup”under DIC Vehicle Customization on page 4‑77 formore information.1-8
