Black plate (53,1)Cadillac DTS Owner Manual - 20116. To tighten the belt, push down on the childrestraint, pull the shoulder portion of the belt totighten the lap portion of the belt, and feed theshoulder belt back into the retractor. Wheninstalling a forward-facing child restraint, it maybe helpful to use your knee to push down on thechild restraint as you tighten the belt.Try to pull the belt out of the retractor to make surethe retractor is locked. If the retractor is not locked,repeat Steps 5 and 6.7. Before placing a child in the child restraint, makesure it is securely held in place. To check, graspthe child restraint at the safety belt path andattempt to move it side to side and back and forth.When the child restraint is properly installed, thereshould be no more than 2.5 cm (1 in) of movement.If the airbags are off, the off indicator in the passengerairbag status indicator will come on and stay on whenthe vehicle is started.If a child restraint has been installed and the onindicator is lit, see “If the On Indicator is Lit for a ChildRestraint ” under Passenger Sensing System onpage 2‑64 for more information.To remove the child restraint, unbuckle the vehiclesafety belt and let it return to the stowed position.2-53
