Black plate (111,1)Cadillac DTS Owner Manual - 2011Listing Stored NumbersThe list command will list all the stored numbers andname tags.Using the “List” Command1. Press and hold b g for two seconds.2. Say “Directory”.3. Say “Hands Free Calling”.4. Say “List”.Making a CallCalls can be made using the following commands.Dial or Call: The dial or call command can be usedinterchangeably to dial a phone number or a storedname tag.Digit Dial: This command allows a phone number to bedialed by entering the digits one at a time.Re‐dial: This command is used to dial the last numberused on the cell phone.Using the “Dial” or “Call” Command1. Press and hold b g for two seconds.2. Say “Dial” or “Call”.3. Say the entire number without pausing or say thename tag.Once connected, the person called will be heardthrough the audio speakers.Using the “Digit Dial” CommandThe digit dial command allows a phone number to bedialed by entering the digits one at a time. After eachdigit is entered, the system repeats back the digit itheard followed by a tone.If an unwanted number is recognized by the system,say “Clear” at any time to clear the last number.To hear all of the numbers recognized by the system,say “Verify” at any time.1. Press and hold b g for two seconds.2. Say “Digit Dial”.3. Say each digit, one at a time, that you want to dial.After each digit is entered, the system repeatsback the digit it heard followed by a tone. After thelast digit has been entered, say “Dial”.Once connected, the person called will be heardthrough the audio speakers.4-111
