Black plate (19,1)Cadillac DTS Owner Manual - 2011The Tire and Loading Information label alsoshows the tire size of the original equipmenttires (C) and the recommended cold tire inflationpressures (D). For more information on tires andinflation see Tires on page 6‑48 and Inflation - TirePressure on page 6‑57 .There is also important loading information on theCertification label. It tells you the Gross VehicleWeight Rating (GVWR) and the Gross AxleWeight Rating (GAWR) for the front and rear axle;see “Certification Label” later in this section.If you have a Professional Vehicle, a Tire andLoading Information label specific to your vehiclewill be provided and installed by the final bodymanufacturer. The Tire and Loading Informationlabel, should be attached to the B‐pillar of yourvehicle. See the final stage manufacturer'smanual or contact them directly. The label showsthe original tires installed on your professionalvehicle and the recommended cold tire inflationpressures for those tires. The label also tells youthe professional vehicle's capacity weight.Steps for Determining Correct Load Limit1. Locate the statement “The combined weightof occupants and cargo should never exceedXXX kg or XXX lbs” on your vehicle's placard.2. Determine the combined weight of the driverand passengers that will be riding in yourvehicle.3. Subtract the combined weight of the driverand passengers from XXX kg or XXX lbs.4. The resulting figure equals the availableamount of cargo and luggage load capacity.For example, if the “XXX” amount equals1400 lbs and there will be five 150 lbpassengers in your vehicle, the amount ofavailable cargo and luggage load capacity is650 lbs (1400 − 750 (5 x 150) = 650 lbs).5-19
