Black plate (17,1)Cadillac DTS Owner Manual - 2011The ACCs are located on the steering wheel.The cruise control buttons are located on left side of thesteering wheel.] (On): Press to turn the system on.+ Res (Resume/Accelerate): Press to make thevehicle resume to a previously set speed or to increasethe set speed when ACC is already active.Set–: Press to set the speed or to decrease the setspeed when ACC is already active.[ (Cancel): Press to disengage ACC without erasingthe set speed from memory.+GAP (Increase Following Distance): Press toincrease the distance between your vehicle and othervehicles.−GAP (Decrease Following Distance): Press todecrease the distance between your vehicle and othervehicles.ACC will not work if the master cylinder brake fluid levelis low.Engaging ACC With the Set ButtonIf the adaptive cruise control switch is on when not inuse, it could get bumped and go into cruise when notdesired. Keep the adaptive cruise control switch offwhen cruise is not being used.The set speed is selected by the driver. This is thespeed your vehicle will travel if there is no vehicledetected in its path.To set ACC, do the following:1. Press the ] button.2. Get up to the speed desired.3. Press in the SET– button and release it.4. Take your foot off the accelerator pedal.Once ACC is set, it may immediately apply the brakes ifit detects a vehicle ahead is too close or moving slowerthan your vehicle.4-17
