Black plate (108,1)Cadillac DTS Owner Manual - 2011PairingA Bluetooth cell phone must be paired to the Bluetoothsystem and then connected to the vehicle before it canbe used. See your cell phone manufacturers user guidefor Bluetooth functions before pairing the cell phone. If aBluetooth phone is not connected, calls will be madeusing OnStar ® Hands‐Free Calling, if available. Refer tothe OnStar owner's guide for more information.Pairing Information. Up to five cell phones can be paired to theBluetooth system.. The pairing process is disabled when the vehicle ismoving.. Pairing only needs to be completed once, unlessthe pairing information on the cell phone changesor the cell phone is deleted from the system.. Only one paired cell phone can be connected tothe Bluetooth system at a time.. If multiple paired cell phones are within rangeof the system, the system connects to thefirst available paired cell phone in the orderthat they were first paired to the system. To linkto a different paired phone, see “Linking to aDifferent Phone” later in this section.Pairing a Phone1. Press and hold b g for two seconds.2. Say “Bluetooth”.3. Say “Pair”. The system responds with instructionsand a four‐digit PIN number. The PIN number isused in Step 5.4. Start the pairing process on the cell phone that youwant to pair. For help with this process, see yourcell phone manufacturers user guide.5. Locate the device named “Your Vehicle” in the liston the cell phone. Follow the instructions on thecell phone to enter the PIN number that wasprovided in Step 3. After the PIN number issuccessfully entered, the system prompts you toprovide a name for the paired cell phone. Thisname will be used to indicate which phones arepaired and connected to the vehicle, see “ListingAll Paired and Connected Phones” later in thissection for more information.6. Repeat Steps 1 through 5 to pair additionalphones.4-108
