Black plate (107,1)Cadillac DTS Owner Manual - 2011Bluetooth ®Vehicles with a Bluetooth system can use a Bluetoothcapable cell phone with a Hands Free Profile to makeand receive phone calls. The system can be used whilethe key is in ON/RUN or ACC/ACCESSORY position.The range of the Bluetooth system can be up to 9.1 m(30 ft). Not all phones support all functions, and not allphones are guaranteed to work with the in-vehicleBluetooth system. See www.gm.com/bluetooth for moreinformation on compatible phones.Voice RecognitionThe Bluetooth system uses voice recognition tointerpret voice commands to dial phone numbers andname tags.For additional information say “Help” while you are in avoice recognition menu.Noise: Keep interior noise levels to a minimum. Thesystem may not recognize voice commands if there istoo much background noise.When to Speak: A short tone sounds after the systemresponds indicating when it is waiting for a voicecommand. Wait until the tone and then speak.How to Speak: Speak clearly in a calm and naturalvoice.Audio SystemWhen using the in‐vehicle Bluetooth system, soundcomes through the vehicle's front audio systemspeakers and overrides the audio system. Use theaudio system volume knob, during a call, to change thevolume level. The adjusted volume level remains inmemory for later calls. To prevent missed calls, aminimum volume level is used if the volume is turneddown too low.Bluetooth ControlsUse the buttons located on the steering wheel tooperate the in‐vehicle Bluetooth system. See AudioSteering Wheel Controls on page 4‑114 for moreinformation.b g (Push To Talk): Press to answer incoming calls, toconfirm system information, and to start speechrecognition.c x (Phone On Hook): Press to end a call, reject acall, or to cancel an operation.4-107