REMOTE DOOR LOCKThis feature allows you to select the type of feedbackyou will receive when locking the vehicle with theRemote Keyless Entry (RKE) transmitter. You will notreceive feedback when locking the vehicle with the RKEtransmitter if the doors are open. See Remote KeylessEntry (RKE) System Operation on page 2-4 for moreinformation.Press the customization button until REMOTE DOORLOCK appears on the DIC display. Press the set/resetbutton to access the settings for this feature. Then pressthe menu up/down button to scroll through the followingsettings:OFF: There will be no feedback when you press thelock button on the RKE transmitter.LIGHTS ONLY: The exterior lamps will flash when youpress the lock button on the RKE transmitter.HORN ONLY: The horn will sound on the second pressof the lock button on the RKE transmitter.HORN & LIGHTS (default): The exterior lamps will flashwhen you press the lock button on the RKE transmitter,and the horn will sound when the lock button is pressedagain within five seconds of the previous command.NO CHANGE: No change will be made to this feature.The current setting will remain.To select a setting, press the set/reset button while thedesired setting is displayed on the DIC.REMOTE DOOR UNLOCKThis feature allows you to select the type of feedbackyou will receive when unlocking the vehicle withthe Remote Keyless Entry (RKE) transmitter. You willnot receive feedback when unlocking the vehiclewith the RKE transmitter if the doors are open. SeeRemote Keyless Entry (RKE) System Operationon page 2-4 for more information.Press the customization button until REMOTE DOORUNLOCK appears on the DIC display. Press theset/reset button to access the settings for this feature.Then press the menu up/down button to scroll throughthe following settings:LIGHTS OFF: The exterior lamps will not flash whenyou press the unlock button on the RKE transmitter.LIGHTS ON (default): The exterior lamps willflash when you press the unlock button on the RKEtransmitter.NO CHANGE: No change will be made to this feature.The current setting will remain.To select a setting, press the set/reset button while thedesired setting is displayed on the DIC.3-63
