How to Check Power Steering FluidTo check the power steering fluid, do the following:1. Turn the key off and let the engine compartmentcool down.2. Wipe the cap and the top of the reservoir clean.3. Unscrew the cap and wipe the dipstick with aclean rag.4. Replace the cap and completely tighten it.5. Remove the cap again and look at the fluid level onthe dipstick.The level should be within the HOT mark. If necessary,add only enough fluid to bring the level within the mark.What to UseTo determine what kind of fluid to use, seeRecommended Fluids and Lubricants on page 6-13.Always use the proper fluid.Notice: Use of the incorrect fluid may damage thevehicle and the damages may not be covered bythe vehicle’s warranty. Always use the correct fluidlisted in Recommended Fluids and Lubricantson page 6-13.Windshield Washer FluidWhat to UseWhen you need windshield washer fluid, be sure to readthe manufacturer’s instructions before use. If you will beoperating your vehicle in an area where the temperaturemay fall below freezing, use a fluid that has sufficientprotection against freezing.5-32
