Selecting a Sender’s Name3-6Sending Documents3Selecting a Sender’s NameFollow this procedure to select one of the registered sender’s names.Sender’s names are selected by pressing [TTI Selector].NOTE• This setting is optional. If you do not select a sender’s name before sending a document,the registered unit’s name is printed at the top of the document in the sender informationarea. (See “Registering Required Sender Information (TX TERMINAL ID),” on p. 1-16.)• If you select a sender’s name before you send a document, it replaces the unit’s nameprinted in the sender information area. (See “Registering Required Sender Information(TX TERMINAL ID),” on p. 1-16.)• Up to 99 sender’s names can be registered. At least one sender’s name must beregistered so you can use this feature. (See “Registering Sender’s Names,” on p. 1-24.)1 Place your documents on the machine.For instructions explaining how to place your documents, see “Setting theDocument on the Machine,” on p. 3-3.NOTEYou can adjust the resolution, contrast, and document type for scanning. (See“Adjusting the Scan Settings,” on p. 3-4.)2 Specify the destination.You can specify the destination using regular dialing, one-touch speed dialing,coded speed dialing, access code dialing, or directory dialing. (See “UsingRegular Dialing,” on p. 3-8, “Using Speed Dialing,” on p. 2-32, or “UsingDirectory Dialing,” on p. 2-39.)3 Open all three one-touch speed dialing panels ➞ press[TTI Selector].TTISelector
