Using Speed Dialing 2-352Using Speed DialingNOTE• To start scanning immediately, press (Start). Otherwise, the machine waits fiveor ten seconds before it starts to scan. This timeout feature can be turned ‘OFF’.(See “TX (Send) Settings,” on p. 11-14.)• The machine does not start dialing until you place your documents for sending. Ifyou dial the code before you place your documents, the machine prompts you toset your documents.• If you press (Coded Dial) and enter a three digit code where no number hasbeen registered, the machine displays:• If you register a number for coded speed dialing, you can, as an option, set the timeyou want your document to go out (up to five different times in a day). (See “SettingUp Coded Speed Dialing,” on p. 2-15.)• If you want to send your document at a preset time using coded speed dialing,make sure that no other preset time has been set by someone else for the code.(See “Setting Up Coded Speed Dialing,” on p. 2-15.)• If you want to cancel the transmission after you enter the coded speed dialingcode, press (Stop).Using Group DialingFollow this procedure to start a transmission and send a document to severaldestinations with a one-touch or coded speed dialing number registered for groupdialing.IMPORTANTTo use this feature, you must first register a group of telephone numbers for one-touch orcoded speed dialing. (See “Setting Up Group Dialing,” on p. 2-24.)1 Place your documents on the machine.For instructions explaining how to place your documents, see “Setting theDocument on the Machine,” on p. 3-3.
