Redialing When the Line Is Busy3-22Sending Documents3Redialing When the Line Is BusyIf the other party’s line is busy or there is no answer, the machine waits twominutes, then tries to dial the same number again. This feature is called “AutomaticRedialing.”What Is Automatic Redialing?After the initial dialing attempt, the machine waits two minutes, and tries to dialagain. If the second attempt fails, the machine waits for two more minutes, andmakes a third and final attempt to complete the call.Auto Redial can be turned ‘ON’ and ‘OFF’. To perform this procedure, see “SettingUp Redialing,” on p. 3-23.The number of redialing attempts and the time interval between attempts can alsobe set with the Auto Redial feature.■ Messages Displayed When RedialingWhile the machine is waiting to redial when using Direct TX, the following message isdisplayed:If all redialing attempts fail, the machine cancels the transaction, displays the followingmessage, and prints an Error TX report to remind you that the transmission did notcomplete.NOTE• To cancel redialing, if you are using Direct Sending, press (Stop). If you are usingMemory Sending, press [Delete File].• To erase the document from memory, press [Delete File]. (See “Erasing a Documentfrom Memory,” on p. 9-22.)• Even if the machine is set to redial several times, it redials only once if there is no dialtone or ring back tone during the first attempt.
