12-14 Maintenance Chapter 127 Press on the two orange tabs andremove the two orange pieces from theBJ cartridge.8 Install the BJ tanks into the BJcartridge. Be sure to install them in theircorrect slot. The illustration here showsthe correct colour array of BJ tanks in aBJ cartridge.• For details on the BJ tanks for each BJcartridge, 1 p. 12-7.Start with the far right BJ tank.If you are installing a new BJ tank,remove the packing film by pulling on theorange tape q. Then grip the bottom ofthe BJ tank and twist off the orangeprotective cap in the direction shown w.• If you are simply replacing the BJ cartridgeand not the BJ tanks, reinsert the partiallyused BJ tanks into the new BJ cartridge. Besure to insert them in their correct slot andfrom right to left.• For a new BJ tank, carefully remove thepacking film taking care not to remove thelabel from the BJ tank.• Discard the packing film and cap. Neverattempt to reattach them to the BJ tank.• Do not touch the ink port on the BJ tank.• Spilled ink can stain any surface; protectyourself and your work area.TO PREVENT INK SPILLS, DO NOTPRESS THE SIDES OF THE BJ TANK.12Colour or Photo BJ cartridgeMade in Japan Made in Japan Made in Japan Made in JapanPUSH PUSHPUSH PUSHInk TankBCI-3eCInk TankBCI-3eMInk TankBCI-3eYInk TankBCI-3eBKBlack Cyan Magenta YellowYELLOWMAGENTACYANBLACKORANGE TABS
