14-4 Summary of Settings Chapter 14DATE & TIMEUNIT TELEPHONE #UNIT NAMETX TERMINAL IDTTI POSITIONTELEPHONE #MARKSCAN CONTRASTOFFHOOK ALARMVOLUME CONTROLCALLING VOLUMEKEYPAD VOLUMEALARM VOLUMELINE MONITOR VOLRX CALL LEVELTEL LINE TYPER-KEY SETTINGSets the current date. (1 p. 3-7)Enters the fax/telephone number you want to appear atthe top of each fax page you send. (1 p. 3-7)Enters the name or company name you want to appearat the top of each fax page you send. (1 p. 3-7)Sets the options for the identification header (TTI).Selects the position of the identification header(outside or inside the image area).*Selects the prefix for the identification header number.(1 p. 3-6)Selects the scanning contrast. (1 p. 7-4)Enables/disables the off hook alarm that alerts youthat the handset is not seated properly in its cradle.Sets the volume of the MultiPASS sounds.Selects the ring volume when the MultiPASS detects avoice call.Selects the keypad touch beep volume.Selects the error alarm volume.Selects the line monitor volume (sound during dialling).Selects the volume of incoming calls.Selects the dialling method the MultiPASS uses foryour telephone line type. (1 p. 3-10)Enables dialling through a switchboard.If you select PBX, you can select additional sub-settings. (1 p. 3-11)–––ONOFFOUTSIDE IMAGEINSIDE IMAGEFAXTELSTANDARDDARKERLIGHTERONOFF–1/2/30 (off)/1/2/30 (off)/1/2/30 (off)/1/2/3HIGHSTANDARDTOUCH TONEROTARY PULSE**PSTNPBX(Default settings are shown in bold type.)* Can only be adjusted for black & white transmissions. For colour transmissions, the TTI information is positionedinside the image area.** The default setting for Ireland, Hong Kong, and Malaysia is ROTARY PULSE.User Settings MenuFor details on accessing the settings below, 1 pp. 14-2, 14-3.Setting Description Sub-Settings
