Chapter 3 Registering Information 3-11RegisteringInformationDialling Through a SwitchboardA PBX (Private Branch Exchange) is an on-site telephone switchboard. If yourMultiPASS is connected through a PBX or other telephone switching system, you haveto dial the outside line access number first, and then the number of the party you arecalling.To facilitate this procedure, you can register the access type and the outside lineaccess number under the R button so that you only need to press Function and Rbefore dialling the fax/telephone number you want to reach. This is explained below.Registering the R ButtonFollow this procedure to register the access type and outside line access number underthe R button:1 Press Function.2 Press Data Registration.3 Press Set twice.4 Use d or u to select R-KEY SETTING.5 Press Set.6 Use d or u to select PBX.7 Press Set. Ex:8 Use d or u to select the access type of Ex:your switching system.*• You can select from the following:– PREFIX– HOOKING– EARTH CONNECTION**PREFIXEARTH CONNECTIONPBXPSTNR-KEY SETTINGDATE & TIMEUSER SETTINGSDATA REGSTRATION* The default setting for the UK and Ireland is EARTH CONNECTION.The default setting for Australia, New Zealand, Hong Kong, Malaysia, and Singapore is HOOKING.** EARTH CONNECTION is not available in Australia, New Zealand, Hong Kong, Malaysia, or Singapore.
