12-18 Maintenance Chapter 12Replacing a BJ TankThis section describes how to replace a BJ tank in an installed BJ cartridge. Beforereplacing a BJ tank, be sure to read the section When to Replace a BJ Cartridge or BJTank. (1 p. 12-8)n• Do not leave empty BJ tanks in the BJ cartridge. Remove them immediately when theyrun out of ink, and replace them with new ones. Do not leave a BJ cartridge with any ofits BJ tanks missing as the ink in the BJ cartridge will dry and adversely affect printquality.• Do not replace BJ tanks while the MultiPASS is printing or performing another operation.Leave the BJ cartridge installed in the MultiPASS and follow this procedure to replace aBJ tank:1 Make sure the MultiPASS is plugged in.2 Open the document tray.3 Lift the handle to open the printercover.• The cartridge holder automatically movesto the centre of the unit.c • Do not try to manually move or stopthe cartridge holder since this maydamage the unit.• Do not touch the componentsshown or any metal parts since thismay adversely affect operation ofthe unit and/or affect print quality.InkTankBCI-3eCCyanMade in JapanPUSHInkTankBCI-3eMMagentaMade in JapanPUSHInkTaBCI-YellowMade in JapanPUSHInkTankBCI-3eBKBlackMade in JapanPUSHRIBBON CABLEGUIDE RAILROUNDSHAFTHANDLE
