COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON iR105 REV.0 JULY 2001CHAPTER 2 NEW FUNCTIONS2-84 6.2 Changes Made to the Pickup/Feeding SystemT02-602-01Unit/location Changes from GP605 (iR600) Propose of change Remarks ReferencePickup roller Changed the material. To support higher speed of operation.Separation roller Changed the material. To support higher speed of operation.Static eliminator Added a static eliminator. To suppress noise; for grounding of the Upward compatible:pull-off roller. right deck, cassette 3/4.Manual feed tray assembly Added a noise damper. To suppress noise caused by impact occurringat time of release of the pick roller.Registration roller Changed the registration brake clutch. To use a set screw for the joint between shaftassembly and clutch, thereby preventing variation in theleading edge registration during high-speedoperation.Changed the shape of the registration cover roller. To accommodate the change in the speed ofthe shaft caused by the use of a set screw stopclutch.Changed the shape of the registration clutch cover. To accommodate the shape of the covercaused by the use of a set screw clutch.Added a bearing coupling gear. To suppress the wobbling of the gear byfitting the bearing by force into the coupling,thereby eliminating the variation in the trans-mission of the drive caused by fluctuations inthe load in the coupling (of the registrationtransfer assembly).Index paper attachment To support the use of index paper. To support the use of index paper. (The attach- 6.5 Index Paper Attachmentment is made available as an option.)
