Chapter 77-14[2].F-7-407.5.8.3 Removing the Feed Guide 0011-0674iR2016J / iR2016 / iR2020 / / iR2016i / iR2020i1) Remove the two screws [1], and then remove the feed guide [2].F-7-417.5.8.4 Removing the Multifeeder Paper Presence/Absence Sensor 0011-0675iR2016J / iR2016 / iR2020 / / iR2016i / iR2020i1) Remove the two claws [1]. Remove the connector [2], and then removethe multifeeder paper presence/absence sensor [3].F-7-427.5.9 Manual Feed Pickup Solenoid7.5.9.1 Removing the Drum Unit 0011-2965iR2016J / iR2016 / iR2020 / / iR2016i / iR2020i1) Open the front cover [1].2) Turn the developer pressure release lever [2] clockwise, and then open theleft door [3].3) Draw out the drum unit [4].F-7-43To prevent exposure to light, cover the drum with several sheets of copypaper and place it in a safe place.Open the left door fully to prevent the damage to the drum unit7.5.9.2 Removing the Transfer Registration Unit 0011-2966iR2016J / iR2016 / iR2020 / / iR2016i / iR2020i1) Remove the four screws [1], and then remove the transfer registration unit[2].F-7-447.5.9.3 Removing the Feed Guide 0011-2967iR2016J / iR2016 / iR2020 / / iR2016i / iR2020i1) Remove the two screws [1], and then remove the feed guide [2].F-7-457.5.9.4 Removing the Multifeeder Connector Cover 0011-1051iR2016J / iR2016 / iR2020 / / iR2016i / iR2020i1) Detach the multifeeder connector cover [1], and then disconnect the threeconnectors [2].[1][1][2][1][2][1][2][3][2][1][3][4][1][1][2][1][2]
