Chapter 11-281.2.3.13 Report Settings (iR2020/iR2020J/iR2016/iR2016J) 0011-1228iR2016J / iR2016 / iR2020 /*: Factory default1.2.3.14 Communication Settings (iR2020i/iR2016i) 0012-6034iR2016i / iR2020iT-1-81.2.3.15 Adjust./Cleaning (iR2020/iR2020J/iR2016/iR2016J) 0011-1229iR2016J / iR2016 / iR2020 /Auto Orientation On*1, OffStandard Settings Store, InitializeInitialize Copy Settings Yes, NoAdditional Functions Available Settings1. SETTINGS TX REPORT: PRINT ERROR ONLY(*), OUTPUT YES, OUTPUT NORX REPORT: OUTPUT NO(*), PRINT ERROR ONLY, OUTPUT YESACTIVITY REPORT: AUTO PRINT (ON(*), OFF), TX/RX SEPARATE (OFF(*), ON)2. LIST PRINT ACTIVITY REPORTSPEED DIAL LIST: 1-TOUCH LIST, CODED DIAL LIST, GROUP DIAL LISTADD BOOK DETAILS: 1-TOUCH LIST, CODED DIAL LISTUSER DATA LISTItem Settings(*1 Indicates the default setting.)Common SettingsTX Settings Unit Name (24 characters maximum)Data Compression Ratio: High Ratio, Normal*1, Low RatioRetry Times: 0 to 5 times; 3 times*1Edit Standard Send SettingsStore, InitializeTX Terminal IDOn*1 (Printing Position: Inside, Outside*1; Telephone # Mark: FAX*1,TEL)Gamma Value for Color Send Jobs: Gamma 1.0, Gamma 1.4, Gamma1.8*1, Gamma 2.2Sharpness: 1 to 7 levels, 4*1Register Favorites Button: M1 to M18Color TX Scan Settings: Speed Priority, Image Priority*1Default Screen for Send: Favorite Buttons, One-touch Buttons, InitialFunction*1Initialize TX Settings: Yes, NoRX Settings Two-sided Print: On, Off*1Select CassetteSwitch A: On*1, OffSwitch B: On*1, OffSwitch C: On*1, OffSwitch D: On*1, OffReceive ReductionOn*1 RX Reduction: Auto*1, Fix. Red.Reduce %: 97, 95, 90*1, 75%Reduce Direction: Ver. Hor.,Vertical Only*1OffContinue Printing When Toner Is Out: Yes*1, NoFax SettingsUser Settings Unit Telephone # (20 characters maximum)Tel Line Type: Tone*1, PulseMonitor Volume Control:Volume Control: 0 to 3 levels, 1*1), Off (0)TX Settings ECM TX: On*1, OffPause Time: 1 to 15 seconds; 2 seconds*1Auto RedialOn*1 Option:Redial Times: 1 to 10 times; 2 times*1Redial Interval: 2 to 99 minutes; 2minutes*1TX Error Redial: On*1, OffOffCheck Dial Tone Before Sending: On*1, OffRotate Send: On*1, OffRX Settings ECM RX: On*1, OffItem Settings(*1 Indicates the default setting.)
