Chapter 88-48.2.2.3 Target Temperatures by Mode 0012-6048iR2016J / iR2016 / iR2020 / / iR2016i / iR2020iThis machine controls the fixing temperature according to the "media type" selected in the user mode and the "target temperature" set in the "special mode."The correspondence between each mode and target temperature is as follows:T-8-2*1: Target fixing temperature at startup. When the initial temperature of the fixing unit is high, the target temperature is lowered. In the continuous copy mode, thetarget temperature is lowered in 5 deg C steps.*2: Number of sheets controlled at the initial target temperature. If it is exceeded, the target temperature is lowered. The prescribed number of sheets varies withthe paper size.8.2.3 Detecting the Passage of Paper8.2.3.1 Detecting the Passage of Paper 0011-1112iR2016J / iR2016 / iR2020 / / iR2016i / iR2020iThe paper passage detection mechanism of the fixing unit is shown below.F-8-4If a delay jam is detected by the fixing delivery sensor (SR202), the fixing motor is stopped immediately to prevent paper from winding around the fixing roller.Fixing mode Paper type Target initial fixingtemperature (*1)Initial number ofsheets (*2)ConditionNormal Plain paper (colored paper/recycled paper/label sheet (64-80 g/m2)190 deg C 1-9 (A4/LTR) Special Mode P: OFF185 deg C 1-9 (A4/LTR) Special Mode P: ONRough Paper Lo Heavy paper 1(81-90 g/m2)195 deg C 1-9 (A4/LTR)Heavy paper 2(91-105g/m2)Rough Paper Heavy paper 3(106-128g/m2)220 deg C 1-9 (A4/LTR)Super rough paper Bond paper 220 deg C 1-100 (A4/LTR) Bond SP. FIX. Mode: OFFSuper rough paper Hi Bond paper 220 deg C 1-100 (A4/LTR) Bond SP. FIX. Mode: ONPostcard Postcard 220 deg C 1-2 Special Mode S: OFFPostcard H Postcard 220 deg C 1 Special Mode S: Speed Priority 1 orSpeed Priority 2Envelope Envelope 220 deg C 1-2OHP OHP 190 deg C 1-9 (A4/LTR)EXP_P_SNSJ217-12SR502DC Controller PCB
