Canon iR2020 Series Service Manual

Also see for iR2016 Series: User guide Easy operation guide Service manual User guide Facsimile guide

Contents

Chapter 88-12spacer (R) [3] are pressed against the rib [4] of the flange cap.F-8-36F-8-379) Release the claw [1] of the pressure cam, remove the pressure cam [2]from the pressure shaft, and then pull out the pressure shaft [3] in thedirection of the arrow.F-8-38When installing the pressure cam, position it inside the bent portion [1] ofthe side plate as shown below.F-8-3910) Remove the delivery roller unit [1], and then remove the fixing film unit[2].F-8-4011) Remove the spacer (F) [1] and spacer (R) [2] by sliding them.F-8-418.4.2.7 Removing the Pressure Roller 0010-9942iR2016J / iR2016 / iR2020 / / iR2016i / iR2020i1) Raise the claw [1] of the fixing unit inlet guide, and remove the slide thefixing unit inlet guide [2] by sliding it in the direction of the arrow.F-8-422) Remove the E-ring [1] and gear [2], and then remove the pressure roller[3].[1][2] [3][4][1][2][3][1][1][2][1] [2][1][2]