Chapter 11-25*: Factory default1.2.3.4 Timer Settings (iR2020i/iR2016i) 0012-6020iR2016i / iR2020iT-1-31.2.3.5 FAX Settings (iR2020/iR2020J/iR2016/iR2016J) 0011-1224iR2016J / iR2016 / iR2020 /*: Factory default1.2.3.6 Adjustment/Cleaning (iR2020i/iR2016i) 0012-6022iR2016i / iR2020iT-1-41.2.3.7 Address Book Set. (iR2020/iR2020J/iR2016/iR2016J) 0011-1225iR2016J / iR2016 / iR2020 /*: Factory defaultItem Settings(*1 Indicates the default setting.)Date & Time Settings Date and Time Setting (12 digit number)Time Zone Settings:GMT -12:00 to GMT +12:00;GMT -03:00*1Daylight Saving Time Settings: On, Off*1Auto Sleep Time On*1 3 to 30 minutes; 5*1OffAuto Clear Time 0 (Off) to 9 minutes, in one minute increments; 2 min.*1Additional Functions Available Settings1. USER SETTINGS UNIT TELEPHONE #UNIT NAMETX TERMINAL ID: ON (PRINTING POSITION: OUTSIDE IMAGE(*), INSIDE IMAGE, TELEPHONE #MARK: FAX(*), TEL), OFFSCANNING DENSITY: -LT - DK+ 9 steps (5(*))TEL LINE TYPE: TOUCH TONE(*), ROTARY PULSEVOLUME CONTROL: MONITOR VOL. CTRL (0 - 3 (1(*)))STANDARD SETTINGS: SCAN DENSITY (STANDARD(*), DK, LT), IMAGE QUALITY (STANDARD(*),FINE, PHOTO, SUPER FINE, ULTRA FINE), DIRECT TX (OFF(*), ON), STAMP DOCUMENT (OFF(*), ON)INIT. FAX STD SET: OFF(*), ON2. TX SETTINGS ECM TX: ON(*), OFFPAUSE TIME: 1 to 15 (4(*)) SEC.AUTO REDIAL: ON (REDIAL TIMES, REDIAL INTERVAL, TX ERROR REDIAL)(*), OFFTIME OUT: ON(*), OFFSTAMP DOCUMENT: DIRECT&MEMORY TX(*), DIRECT TXDIALING LINE CHCK: ON(*), OFFROTATE TX: ON(*), OFF3. RX SETTINGS ECM RX: ON(*), OFF4. PRINTER SETTINGS SELECT DRAWER: SWITCH A (ON(*), OFF), SWITCH B (ON(*), OFF), SWITCH C (ON(*), OFF), SWITCHD (ON(*), OFF)RECEIVE REDUCTION: ON (RECEIVE REDUCTION, REDUCE DIRECTION)(*), OFFTWO-SIDED PRINT: OFF(*), ONCONT. PRINTING: RX TO MEMORY(*), KEEP PRINTINGItem Settings(*1 Indicates the default setting.)Transfer Roller Cleaning Press [Start]Fixing Unit Cleaning Press [Cleaning Sheet Print]Feeder Cleaning Press [Start]Special Mode M Normal*1, Low, HighSpecial Mode N On, Off*1Special Mode O Stack Bypass: On, Off*1Drawer: On, Off*1Special Mode P On, Off*1Bond Special Fixing Mode On, Off*1Special Mode S Speed Priority 1, Speed Priority 2, Off*1Auto Adjustment for Dirty Feeder On*1, OffAdditional Functions Available Settings1. 1-TOUCH SPD DIAL Up to 60 destinations can be registered: TEL NUMBER ENTRY, NAME, OPTIONAL SETTING2. CODED SPD DIAL Up to 140 destinations can be registered: TEL NUMBER ENTRY, NAME, OPTIONAL SETTING3. GROUP DIAL Up to 199 destinations can be registered: TEL NUMBER ENTRY, NAME
