COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV.0 MAR. 2001CHAPTER 2 ORIGINAL EXPOSURE SYSTEM2-24 R5.3 Sensors5.3.1 Removing the Original Detection Unit1) Remove the copyboard glass. (p. 3-11R)2) Remove the two screws [1], and detachthe motor shield plate [2].3) Disconnect the connector [3].4) Remove the six screws [4], and detachthe CCD shield plate [5].F02-503-015) Remove the screw [1], and disconnectthe connector [2].6) Shift the original detection unit [3] tothe rear to detach.When removing it, be sure totake full care not to damage thecable [5].F02-503-025.3.2 Removing the HP Sensor1) Remove the reader rear cover(5 screws).2) Remove the left support cover.3) Remove the two harness bands [1].4) Remove the screw [1], and detach thesensor mounting plate [2].F02-503-03[1][3][4][4][4][5][2][1][2][4][3][1][2][3]
