COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV.0 MAR. 2001CHAPTER 5 SERVICE MODE5-50 TUse it to fine-adjust the copy density auto correction mechanism.If you have cleared the RAM on the DC controller PCB and replaced the PCB, be sure toenter the settings indicated on the service label.DENS-ADJUse it to correct the density of images (copier/printer).Use it to correct the F-value table if the image is foggy or the high-densityarea is fuzzy.Range of 1 to 9; default: 5adjustmentF05-401-07COPIER>ADJUST>BLANKUse it to adjust the non-image width.If you have cleared the RAM on the DC controller PCB and replaced the PCB, be sure toenter the settings indicated on the service label.BLANK-TUse it to enter the leading edge non-image width.Range of -100 to +100adjustmentBLANK-BUse it to enter the trailing edge non-image width.Range of -100 to +100adjustmentWhiteCopy densityBlack Original density WhiteF9 F1A lower settingdecreases fogging.A higher settingdecreases fuzziness.COPIER>ADJUST>DENS
