COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV.0 MAR. 2001CHAPTER 3 INSTALLATION3-16 S2.9 Checking the Images/OperationsWork Checks/remarks1) To install the machine not using the 2-cassette pedestal, mount the right lowercover [1].1. Skip this step if the machineis installed on a 2-cassettepedestal.2. After removing the rightlower cover, check to makesure that the cover is securelyin place.2) Clean the surface of the reading glass ofthe copyboard.3) Using the NA-3 Chart as the original,make a print to check the images andthe operation.4) Make user mode settings (e.g., date,time) and service mode settings(COPIER>OPTION>USER) to suit theneeds of the user.Optimum Image• In text mode, the white backgroundmust not be foggy.• In text/photo mode, step edge No. 10must be barely visible. The whitebackground must be free of fogging.• In photo mode, the white backgroundmust be free of fogging. (The moire, ifany, along the step edges and the half-tone area does not indicate a fault.)The non-image width must be as indi-cated: 2.5±1.5 mm.Checking the Operations• During copying operation, check tomake sure the operations are normal.• During double-sided copying opera-tion, check to make sure that paper ismoved normally in the duplex unit.• For pickup operation, check to makesure that pickup from each source ofpaper is normal.• There must not be abnormal operatingnoise.• Make copies at each default reproduc-tion ratio, and check to make sure thatthe images are normal.• Make copies in multiple sets, andcheck to make sure that copies aremade specified numbers.[1]
