COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV.0 MAR. 2001CHAPTER 1 MAINTENANCE AND INSPECTION1-8 T5 Points to Note for Scheduled ServicingUnless otherwise indicated, use lint-free paper and alcohol.• If you used solvent, check to make sure that the solvent has dried be-fore mounting the component back into the machine.• Unless otherwise specified, do not use a moist cloth for cleaning.• Provide scheduled servicing at the specified intervals.F01-500-01No. 1 through No. 3 mirrorsCleaning (blower brush)Reflecting shadeCleaning (blower brush) Copyboard glassCleaningOriginal size sensorCleaning (blower brush)Scanner railLubricatingScanner cableCheckLensCleaning (blower brush)Bending mirrorCleaning (special tool)Feeding assembly baseCleaningDeveloping assembly baseDry wipingTransfer guideCleaningDeveloping assembly bottomCleaningWaste toner caseChecking, disposing(Remove waste toner, and then clean thetoner case, Replace the toner case, if any.)Inlet guide (upper/lower)Cleaning (solvent) Pre-registration guideCleaning (paper lint)
