3 Using a TCP/IP NetworkRegistering a Security Policy 3-63Select [All IPv6 addresses] for .Applying a Security Policy to the IP Packets Received from and Sent to theSpecified IPv4 Address or IPv4 Network Address:Select [IPv4 Manual Settings] for → specify a single IPv4address or range of IPv4 addresses. Also specify the subnet.Applying a Security Policy to the IP Packets Received from and Sent to theSpecified IPv6 Address or IPv6 Network Address:Select [IPv6 Manual Settings] for → specify a single IPv6address or range of IPv6 addresses. Also specify the IPv6 address and prefixlength.6. On the Selector Settings screen, specify the destination port to apply theregistered security policy to.When receiving IP packets, the registered security policy is applied if the destination port inthe packets matches the port number specified in this procedure. When sending IP packets,the registered security policy is applied if the source port in the packets matches the portnumber specified in this procedure.● Applying a Security Policy to the IP Packets Received from and Sent to the Local Port andRemote Port Specified By Port Number:● Applying a Security Policy to the IP Packets Received from and Sent to the Port SpecifiedBy Assigned Application:
