Canon iR3245 Network Manual

Also see for iR3225: User guide Troubleshooting guide Easy operation guide Guide

6 Using an AppleTalk Network (Macintosh)6-2 AppleTalk Network Setup ProceduresAppleTalk Network Setup ProceduresTo print via an AppleTalk network, it is necessary to perform the following procedures.1 Macintosh Network SettingsTo specify AppleTalk network settings, enable AppleTalk according to the instructions in thedocumentation provided with your Macintosh.2 Protocol Settings (See " Protocol Settings (p.6-3) .")Specify the protocol settings. To specify the settings, use:The machine's control panelThe Remote UI (via a web browser)Canon utilities (NetSpot Device Installer, etc.)3 Macintosh Print Settings (See " Setting Up a Computer for Printing (p.6-5) .")Specify the settings for each computer you use for printing.RemarkYou can only specify the AppleTalk protocol settings ifyou are using the iR3245N/iR3235N/iR3225N, or theiR3245/iR3235/iR3225 with the optional UFR II PrinterKit, the optional UFR II/PCL Printer Kit, or the optionalPS Printer Kit.Depending on the machine you are using, you may haveto use optional equipment to print via an AppleTalknetwork. For the equipment needed, see "OptionalEquipment and System Requirements(p.1-2)."It is recommended that the network administratorperform step 2.