Canon iR3245 Network Manual

Also see for iR3225: User guide Troubleshooting guide Easy operation guide Guide

6 Using an AppleTalk Network (Macintosh)Setting Up a Computer for Printing 6-5Setting Up a Computer for PrintingAfter you have completed the machine protocol settings, install the printer driver on the Macintoshthat will do the printing, and then make the settings for the print destination.Specify the following settings according to the instructions in the manual for each driver.RemarkDepending on the machine you are using, you may haveto use optional equipment to print via an AppleTalknetwork. For the equipment needed, see "OptionalEquipment and System Requirements(p.1-2)."If you want to use the UFR II printer driver1. Installation of the UFR II printer driverSee the Mac UFR II Driver Guide.2. Print settingsSet the machine as the print destination.If you want to use a PS printer driver provided by Apple Inc. with the Mac OS1. Installation of the PPD fileSee Chapter 10, "Before Printing from Computers," in Getting Started.2. Print settingsSet the machine as the print destination.3. Selection of the printer nameSelect either of the following names displayed in the Macintosh screen. ('xxx' indicates the name ofthe printer entered in [Service Name].)[xxx_D]: the print job is printed without spooling to the hard disk of the machine.[xxx_S]: the print job is printed after it has been spooled to the hard disk of the machine.