2 Settings Common to the Network ProtocolsCommunication Environment Setup 2-15If you want to specify a Community Name 2Press [Community Name 2 Settings] → [On] → specify the settings for Access Permission> and the community name in [Community Name].You can also change the community name in [Community Name] to a name other than'public2'.2. Specify the settings for SNMP v. 3.[On] for procedures.An SNMP v. 3 user with the following settings is registered by default. Delete or change these settings asnecessary.User: initialMIB Access Permission: Read/WriteSecurity Settings: Auth Yes/Encrypt YesAuthent. Algorithm: MD5Authent. Password: initialEncryption Password: initial● If you want to add an SNMP v. 3 user:● If you want to confirm or change the SNMP v. 3 user settings:● If you want to erase an SNMP v. 3 user:● If you want to change the status of an SNMP v. 3 user:● If you want to edit the context:
