Canon iR3245 Network Manual

Also see for iR3225: User guide Troubleshooting guide Easy operation guide Guide

7 Troubleshooting7-10 Printing Problems and RemediesUnable to Print from an AppleTalk NetworkCause 1 The machine and cable are not properly connected.RemedyTurn OFF the machine's power switches, check that the machine isconnected to the network using the proper cable, and then turn themON. (See "Connecting the Machine to a Computer or Network(p.2-3).")Cause 2 The AppleTalk network is not properly set up.RemedyConfirm the AppleTalk settings. In particular, check the following:Set the [Phase] to a valid phase type.Set the [Zone] to the zone to which the printer belongs.Your computer may not be able to recognize the machine even though the IP addresssettings are appropriate. This problem may be resolved by delaying the startup ofnetwork communications for the machine. (See "Startup Time Settings(p.3-78).")Cause 3 The computer that is printing is not properly set up.RemedyCheck the following Macintosh settings:Confirm that the proper printer driver is installed.Confirm that the proper printer has been selected as the destination.Confirm that [AppleTalk] is active.Confirm that the AppleTalk connection method is EtherTalk or Ethernet.Cause 4 An error message is displayed on the touch panel display of themachine.Remedy After confirming the error message, perform the necessary operationsaccording to the error message displayed.