Canon iR3245 Network Manual

Also see for iR3225: User guide Troubleshooting guide Easy operation guide Guide

5 Using a NetBIOS NetworkSetting Up a Computer as a File Server 5-15Setting Up a Computer as a File ServerTo send data from the machine to a computer on your network, you need to specify the settings of thecomputer for receiving data. You can send data over a NetBIOS network to a Windows or Samba(UNIX/Linux/Mac OS X) shared folder. This section describes how to configure a shared folder.RemarkSamba 2.2.8a or later is supported.Optional equipment is required to send data from themachine. For the equipment needed, see"OptionalEquipment and System Requirements(p.1-2)."This section describes only the procedures for settingup a computer receiving data sent from the machine.To send data from the machine to a server on thenetwork, you must enter an address setting from thecontrol panel. For instructions on how to specifyrecipient address settings, see the Sending andFacsimile Guide.The following procedures describe a sample sharedfolder configuration. Depending on yourenvironment,the actual configuration procedure may differ.