Sending Documents4‑16Scan SettingsYou can specify the scan settings to match the original you are sending.Selecting a Scan ModeThe machine has three preset scan modes:B&W 200 x 200 dpi, B&W 300 x 300 dpi, and Color 300 x 300 dpi (for the imageCLASSMF7480)200 x 200 dpi (Fine), 200 x 400 dpi (SuperFine), and 400 x 400 dpi (UltraFine) (for theimageCLASS MF7470/MF7460)Select the desired mode from the preset scan modes according to the type of originalyou are sending.If the destination is a fax number or I‑fax address, the original is always scanned and sent in B&W mode.If you want to use less memory and make the sending time shorter, use a low‑resolution mode.In addition to the scan mode, you can store addresses and other send settings in the favorites buttons. (See“Storing/Editing Favorites Buttons,” on p. 4‑86.)–––––1 Press (SEND).2 Place your originals.3① Specify the destination.② Press [Scan Settings].③ Select a scan mode.For instructions on specifying destinations,see “Specifying Destinations,” on p. 4‑32.The following combinations of file formatand preset scan modes are not available.If you select them, a message asking foryour confirmation to change the file formatappears on the screen when you press(Start).[PDF (Compact)] or [JPEG] as the fileformat and [B&W 200 x 200 dpi] or [B&W300 x 300 dpi] as the scan mode.[TIFF] or [PDF] as the file format and[Color 300 x 300 dpi] as the scan mode.[Color 300 x 300 dpi] is not available whensending faxes or I‑faxes.To change the Scan mode settings, select[Option] from the Scan Settings drop‑downlist, and adjust the settings.––––––
