11‑23TroubleshootingError Code Description Action#0059 Your transmission is canceledbecause the number you dialed wasdifferent from the number registeredon the other party’s fax machine.Check to see that the correct faxnumber is registered on the otherparty’s fax machine.#0701 The specified Department ID does notexist, or the password has changed.Enter the correct Department ID orpassword using – (numeric keys),and try again. (See “Department/UserID Management,” on p. 1‑17.)#0703(for theimageCLASSMF7480 only)The memory for image data is fullwhen sending color documents.Wait a few moments, and then trysending again after other send jobsare complete.Erase documents stored inmemory. If the machine still doesnot operate normally, turn themain power off, and then back on.––#0705(for theimageCLASSMF7480 only)The send operation was interruptedbecause the size of the imagedata is larger than that specified inMaximum TX Data Size set in E‑mail/I‑Fax Settings in CommunicationsSettings in System Settings (from theAdditional Functions screen).Change the setting for theMaximum TX Data Size in E‑mail/I‑Fax Settings in CommunicationsSettings in System Settings (fromthe Additional Functions screen).Select a lower resolution.If you are using I‑fax, decreasethe number of pages containingimages that you are sending eachtime, so that you do not exceed theMaximum TX Data Size.Set Divide into Pages to [On] in theFile Format screen.––––#0749 You could not execute the jobbecause a service call message isbeing displayed.Turn the main power off, wait for 10seconds, and turn the main powerback on. If the machine still does notwork normally, turn the main poweroff, disconnect the machine, andcontact Canon Authorized ServiceFacilities or the Canon Customer CareCenter.# 0751(for theimageCLASSMF7480 only)The server is not functioning. Thenetwork is down (the server is unableto connect to the network or wasdisconnected).Check the recipient’s address.Check that the network is up.––
