Sending Documents4‑26Original Type SelectionYou can manually select the original type according to the type of image that you arescanning.The following three original type modes are available for adjusting the image quality.Text ModeThis mode is best suited for scanning text originals. Blueprints or pencil drawn originalscan also be scanned clearly.Text/Photo ModeThis mode is best suited for scanning originals containing both text and photos.Photo ModeThis mode is best suited for scanning photos printed on photographic paper, or photooriginals containing halftones (e.g., printed photos).Combinations of these three modes (Text/Photo, Photo, and Text) cannot be selected at the same time. If youselect one of these modes, the previously set mode is canceled.If you scan an original containing halftones, such as a printed image, using the Photo mode, the moiréeffect (a shimmering, wavy pattern) may occur. In this case, you can lessen the moiré effect by adjusting thescanning contrast (sharpness). (See “Sharpness,” on p. 12‑13.)If you have selected [PDF (Compact)] as the file format, this setting is disabled.If you select the automatic density adjustment mode, the original type setting is disabled.If the original is a transparency, select the original type, then adjust the density to the most appropriate levelfor the original.–––––1 Press (SEND).2 Place your originals.3① Specify the destination.② Press [Scan Settings].③ Press [Option].For instructions on specifying destinations,see “Specifying Destinations,” on p. 4‑32.4① Press the original type drop‑down list.
