5‑11Receiving DocumentsAvailable Paper SizesWhen received documents are printed, they are printed from the paper drawer thathas the same size paper as the received document. If all of the settings in SelectCassette in RX Settings under in Communications Settings areset to [On], and paper of the correct size is not available, the machine automaticallyselects a different paper size in the following order. The paper size is automaticallyselected in the same order, even if paper runs out during printing.Available Paper Sizes for Received Documents11" x 17" originals 11" x 17" → LGL* → LTR* → STMT x 2LGL originals LGL → LTR* → 11" x 17" → STMT x 3LTR originals LTR → LGL → 11" x 17"→ STMT x 2STMT originals STMT → LTR → LGL → 11" x 17"Received documents are automatically reduced or separated before being printed on thepaper size indicated.The order of paper selection may differ depending on the resolution set on the sending party’s machine.Received documents can be printed on the following paper sizes and paper types:Paper Sizes: 11" x 17", LGL, LTR, LTRR, or STMTRPaper Types: plain or recycledYou can specify any paper drawer to receive fax/I‑fax documents. The default setting is [On], except for thestack bypass.You can set the machine to reduce received documents by 75%, 90%, 95%, or 97% if the document is largerthan any of the available paper sizes. (See Chapter 4, “Sending and Receiving,” in the Reference Guide.)You can change the order of paper selection. (See Chapter 4, “Sending and Receiving,” in the ReferenceGuide.)You can set the machine to print received documents on both sides of the paper. (See Chapter 4, “Sendingand Receiving,” in the Reference Guide.)Received documents are output face down, in the order in which the pages are received.*–––––––––
