xxiiiWhat Can I Do with This Machine?Power SupplyDo not damage or modify the power cord. Also, do not place heavy objects on the powercord, or pull on or excessively bend it, as this could cause electrical damage and result ina fire or electrical shock.Keep the power cord away from a heat source; failure to do this may cause the powercord coating to melt, resulting in a fire or electrical shock.Do not connect or disconnect the power cord with wet hands, as this may result inelectrical shock.Do not connect the power cord to a multiplug power strip, as this may cause a fire orelectrical shock.Do not bundle up or tie the power cord in a knot, as this may result in a fire or electricalshock.Insert the power plug completely into the power outlet, as failure to do so may result in afire or electrical shock.Do not use power cords other than the power cord provided, as this may result in a fire orelectrical shock.As a general rule, do not use extension cords. Using an extension cord may result in a fireor electrical shock. If an extension cord must be used, however, use one rated for voltagesof 120 V AC and over, untie the cord binding, and insert the power plug completely intothe extension cord outlet to ensure a firm connection between the power cord and theextension cord.Do not use power supplies with voltages other than those specified herein, as this mayresult in a fire or electrical shock.Always grasp the power plug when disconnecting the power cord. Pulling on the powercord may expose or snap the core wire, or otherwise damage the power cord. If thepower cord is damaged, this could cause current to leak, resulting in a fire or electricalshock.Leave sufficient space around the power plug so that it can be unplugged easily.If objects are placed around the power plug, you will be unable to unplug it in anemergency.Make sure that the power supply for the machine is safe, and has a steady voltage.Do not connect other electrical equipment to the same power outlet to which themachine is connected.–––––––––––––
