VLT ® 2800 SeriesProgrammingDescription of choice:The Quick Menu is set up as follows:1. Select parameter 025 Quick Menu setupand press [CHANGE DATA].2. Index 1 indicates the first parameter in QuickMenu. You can scroll between the index numbersusing the [+ / -] keys. Select Index 1.3. Using [< >] you can scroll between thethree figures. Press the [<] key once adthe last number in the parameter numbercan be selected using the [+ / -] keys.Set Index 1 to 100 for parameter 100 Configuration.4. Press [OK] when Index 1 has been set to 100.5. Repeat steps 2 - 4 until all parameters requiredhave been set to the Quick Menu key.6. Press [OK] to complete the Quick Menu setup.If parameter 100 Configuration is selected atIndex 1, Quick Menu will start with this parameterevery time Quick Menu is activated.Please note that parameter 024 User-defined QuickMenu and parameter 025 Quick Menu setup arereset to the factory setting during initialisation.✭ = factory setting. () = display text [] = value for use in communication via serial communication portMG.28.E9.02 - VLT is a registered Danfoss trademark 67
