VLT ® 2800 Series349 Speed comp delay(SPEED COMP DELAY)Value:0 ms - 100 ms ✭ 10 msFunction:In this parameter the user can set the system’sdelay time (Sensor, PLC, etc.). If you are runningspeed-compensated stop, the delay time atdifferent frequencies has a major influence onthe way in which you stop.Description of choice:The factory setting is 10 ms. This means that it isassumed that the total delay from the Sensor, PLCand other hardware corresponds to this setting.NB!:Only active for speed-compensated stop.✭ = factory setting. () = display text [] = value for use in communication via serial communication portMG.28.E9.02 - VLT is a registered Danfoss trademark96
