Wireless menuUse the following menu items to view or configure the wireless internal print server settings.Note: This menu is available only for models connected to a wireless network.This menu is available from the Network/Ports menu:Network/Ports Network Net Setup WirelessMenu item DescriptionNetwork ModeInfrastructureAd hocSpecifies the network modeNotes:• Infrastructure mode lets the printer access a network using an accesspoint.• Ad hoc is the factory default setting. Ad hoc mode configures theprinter for wireless networking directly between it and a computer.Compatibility802.11n802.11b/g802.11b/g/nSpecifies the wireless standard for the wireless networkChoose Network
Lets you select an available network for the printer to useView Signal Quality Lets you view the quality of the wireless connectionView Security Mode Lets you view the encryption method for the wireless connection.“Disabled” indicates that the wireless network is not encrypted.AppleTalk menuThis menu is available from the Network/Ports menu:Network/Ports Standard Network or Network Std Network Setup or Net Setup AppleTalkMenu item DescriptionActivateYesNoActivates AppleTalk supportNote: Yes is the factory default setting.View Name Shows the assigned AppleTalk nameNote: The name can be changed only from the Embedded Web Server.View Address Shows the assigned AppleTalk addressNote: The address can be changed only from the Embedded Web Server.Set Zonenetwork>Provides a list of AppleTalk zones available on the networkNote: The default setting is the default zone for the network. If no default zoneexists, the zone marked with an * is the default setting.Understanding printer menus103
