NetWare menuThis menu is available from the Network/Ports menu:Network/Ports Standard Network or Network Std Network Setup or Net Setup NetWareMenu item DescriptionActivateYesNoActivates NetWare supportNote: No is the factory default setting.View Login Name Lets you view the assigned NetWare login nameNote: This can be changed only from the Embedded Web Server.Print Mode Lets you view the assigned NetWare print modeNote: This can be changed only from the Embedded Web Server.Network Number Lets you view the assigned NetWare network numberNote: This can be changed only from the Embedded Web Server.Select IPX Frame TypesEthernet 802.2Ethernet 802.3Ethernet Type IIEthernet SNAPEnables the Ethernet frame type settingNote: On is the factory default setting for all menu items.Packet BurstYesNoReduces network traffic by allowing the transfer and acknowledgement ofmultiple data packets to and from the NetWare serverNote: Yes is the factory default setting.NSQ/GSQ ModeYesNoSpecifies the NSQ/GSQ Mode settingNote: Yes is the factory default setting.USB menuMenu item DescriptionPCL SmartSwitchOnOffSets the printer to automatically switch to PCL emulation when a print job receivedthrough a USB port requires it, regardless of the default printer languageNotes:• On is the factory default setting.• When the Off setting is used, the printer does not examine incoming data.• When the Off setting is used, the printer uses PostScript emulation if the PSSmartSwitch setting is On. It uses the default printer language specified in theSetup menu if the PS SmartSwitch setting is Off.Understanding printer menus104
