MAKE SURE THE INTERNAL PRINT SERVER IS INSTALLED PROPERLY AND WORKING• Make sure the internal print server is properly installed and that the printer is connected to the network.• Print a network setup page and check that the status shows Connected. If the status is Not Connected, checkthe network cables, and then try printing the network setup page again. Contact your system support personto make sure the network is functioning correctly.MAKE SURE YOU ARE USING A RECOMMENDED USB, SERIAL, OR E THERNET CABLEMAKE SURE PRINTER CABLES ARE SECURELY CONNECTEDCheck the cable connections to the printer and print server to make sure they are secure.For more information, see the setup documentation that came with the printer.Confidential and other held jobs do not printThese are possible solutions. Try one or more of the following:PARTIAL JOB , NO JOB , OR BLANK PAGES PRINTThe print job may contain a formatting error or invalid data.• Delete the print job, and then print it again.• For PDF documents, recreate the PDF and then print it again.MAKE SURE THE PRINTER HAS SUFFICIENT MEMORYFree up additional printer memory by scrolling through the list of held jobs and deleting some of them.Job takes longer than expected to printThese are possible solutions. Try one or more of the following:REDUCE THE COMPLEXITY OF THE PRINT JOBEliminate the number and size of fonts, the number and complexity of images, and the number of pages in thejob.C HANGE THE PAGE P ROTECT SETTING TO O FF1 From the printer control panel, press .2 Press the up or down arrow button until Settings appears, and then press .3 Press the up or down arrow button until General Settings appears, and then press .4 Press the up or down arrow button until Print Recovery appears, and then press .Troubleshooting169
