Menu item DescriptionSeparator SheetsNoneBetween CopiesBetween JobsBetween PagesSpecifies whether blank separator sheets are insertedNotes:• None is the factory default setting.• Between Copies inserts a blank sheet between each copy of a print job ifCollation is set to On. If Collation is set to Off, a blank page is inserted betweeneach set of printed pages, such as after all page 1's and after all page 2's.• Between Jobs inserts a blank sheet between print jobs.• Between Pages inserts a blank sheet between each page of the print job. Thissetting is useful when printing transparencies or inserting blank pages in adocument for notes.Separator SourceTray Multi-Purpose FeederSpecifies the paper source for separator sheetsNotes:• Tray 1 (standard tray) is the factory default setting.• From the Paper menu, Configure MP must be set to Cassette in order forMulti-Purpose Feeder to appear as a menu setting.N-up (pages-side)Off2-Up3-Up4-Up6-Up9-Up12-Up16-UpSpecifies that multiple-page images be printed on one side of a sheet of paperNotes:• Off is the factory default setting.• The number selected is the number of page images that will print per side.N-up OrderingHorizontalReverse HorizontalReverse VerticalVerticalSpecifies the positioning of multiple-page images when using N-up (pages-sides)Notes:• Horizontal is the factory default setting.• Positioning depends on the number of images and whether the images are inportrait or landscape orientation.OrientationAutoLandscapePortraitSpecifies the orientation of a multiple-page sheetNote: Auto is the factory default setting. The printer chooses between portrait andlandscape.N-up BorderNoneSolidPrints a border around each page image when using N-up (pages-sides)Note: None is the factory default setting.Staple JobOffOnSpecifies whether print jobs are stapledNotes:• This menu item is available only when the Staple Finisher is installed.• Off is the factory default setting. Print jobs are not stapled.• Envelopes are not stapled.Understanding printer menus119
