1231 Firmware and flash memory card connectors2 Memory card connector3 Printer hard disk connectorInstalling a memory cardNote: This task requires a flathead screwdriver.CAUTION—SHOCK HAZARD: If you are accessing the system board or installing optional hardware or memorydevices sometime after setting up the printer, then turn the printer off, and unplug the power cord from thewall outlet before continuing. If you have any other devices attached to the printer, then turn them off as well,and unplug any cables going into the printer.Warning—Potential Damage: System board electronic components are easily damaged by static electricity. Touchsomething metal on the printer before touching any system board electronic components or connectors.An optional memory card can be purchased separately and attached to the system board. To install the memorycard:1 Access the system board.123Additional printer setup21
