524 | Layer 2w w w . d e l l . c o m | s u p p o r t . d e l l . c o mTo display a list of all interfaces with a MAC learning limit:Learning Limit Violation ActionsLearning Limit Violation Actions are supported on platforms: e zYou can configure the system to take an action when the MAC learning limit is reached on an interface anda new address is received using one of the following options with the mac learning-limit command:FTOS Behavior: The C-Series and S-Series do not generate a station-move violation log entry for physical interfacesor port-channels when you configure mac learning-limit or when you configure mac learning-limitstation-move-violation log. FTOS detects a station-move violation only when you configure mac learning-limitdynamic, and logs the violation only when you configure the mac learning-limit station-move-violation log, asshown below:FTOS(conf-if-gi-1/1)#show config!interface GigabitEthernet 1/1no ip addressswitchportmac learning-limit 1 dynamic no-station-movemac learning-limit station-move-violation logno shutdownTask Command Syntax Command ModeDisplay a list of all interfaces with a MAC learninglimit.show mac learning-limit EXEC PrivilegeTask Command Syntax Command ModeGenerate a system log message when the MAC learninglimit is exceeded.learn-limit-violation log INTERFACEShut down the interface and generate a system logmessage when the MAC learning limit is exceeded.learn-limit-violation shutdown INTERFACE
