60 | Managementw w w . d e l l . c o m | s u p p o r t . d e l l . c o mConfigure a UNIX logging facility levelYou can save system log messages with a UNIX system logging facility.To configure a UNIX logging facility level, use the following command in the CONFIGURATION mode:To view nondefault settings, use the show running-config logging Command in the EXEC mode.show running-config logging CommandFTOS#show running-config logging!logging buffered 524288 debuggingservice timestamps log datetime msecservice timestamps debug datetime msec!logging trap debugginglogging facility userlogging source-interface Loopback 0logging 10.10.10.4FTOS#Command Syntax Command Mode Purposelogging facility [facility-type] CONFIGURATION Specify one of the following parameters.• auth (for authorization messages)• cron (for system scheduler messages)• daemon (for system daemons)• kern (for kernel messages)• local0 (for local use)• local1 (for local use)• local2 (for local use)• local3 (for local use)• local4 (for local use)• local5 (for local use)• local6 (for local use)• local7 (for local use). This is the default.• lpr (for line printer system messages)• mail (for mail system messages)• news (for USENET news messages)• sys9 (system use)• sys10 (system use)• sys11 (system use)• sys12 (system use)• sys13 (system use)• sys14 (system use)• syslog (for syslog messages)• user (for user programs)• uucp (UNIX to UNIX copy protocol)The default is local7.
