858 | Simple Network Management Protocol (SNMP)w w w . d e l l . c o m | s u p p o r t . d e l l . c o mCopy Configuration Files Using SNMPUse SNMP from a remote client to:• copy the running-config file to the startup-config file.• copy configuration files from the Dell Force10 system to a server.• copy configuration files from a server to the Dell Force10 system.When a startup or running configuration copy performed via SNMP or CLI is complete, a trap is sent. Thistrap is enabled by the command snmp-server enable traps config. The traps are triggered only when thecopy function is generated by an SNMP set command or a CLI copy command; the traps will not betriggered when the configuration is changed by BMP or if the startup configuration is overwritten by therunning configuration before reloading the chassis. The traps are generated for the following CLI andcorresponding SNMP_Set commands:• Copy running-config startup-config• Copy abc.txt startup-config• Copy startup-config abc.txt• Copy ftp://... /abc.txt startup-configxstp %SPANMGR-5-STP_NEW_ROOT: New Spanning Tree Root, Bridge ID Priority 32768,Address 0001.e801.fc35.%SPANMGR-5-STP_TOPOLOGY_CHANGE: Bridge port GigabitEthernet 11/38 transitionedfrom Forwarding to Blocking state.%SPANMGR-5-MSTP_NEW_ROOT_BRIDGE: Elected root bridge for instance 0.%SPANMGR-5-MSTP_NEW_ROOT_PORT: MSTP root changed to port Gi 11/38 for instance0. My Bridge ID: 40960:0001.e801.fc35 Old Root: 40960:0001.e801.fc35 New Root:32768:00d0.038a.2c01.%SPANMGR-5-MSTP_TOPOLOGY_CHANGE: Topology change BridgeAddr: 0001.e801.fc35 MstpInstance Id 0 port Gi 11/38 transitioned from forwarding to discarding state.ecfm %ECFM-5-ECFM_XCON_ALARM: Cross connect fault detected by MEP 1 in Domaincustomer1 at Level 7 VLAN 1000%ECFM-5-ECFM_ERROR_ALARM: Error CCM Defect detected by MEP 1 in Domain customer1at Level 7 VLAN 1000%ECFM-5-ECFM_MAC_STATUS_ALARM: MAC Status Defect detected by MEP 1 in Domainprovider at Level 4 VLAN 3000%ECFM-5-ECFM_REMOTE_ALARM: Remote CCM Defect detected by MEP 3 in Domaincustomer1 at Level 7 VLAN 1000%ECFM-5-ECFM_RDI_ALARM: RDI Defect detected by MEP 3 in Domain customer1 atLevel 7 VLAN 1000 SNMP Copy Config Command Completed%RPM0-P:CP %SNMP-4-RMON_RISING_THRESHOLD: RMON rising threshold alarm from SNMPOID %RPM0-P:CP %SNMP-4-RMON_FALLING_THRESHOLD: RMON falling threshold alarm fromSNMP OID %RPM0-P:CP %SNMP-4-RMON_HC_RISING_THRESHOLD: RMON high-capacity rising thresholdalarm from SNMP OID Table 42-2. Dell Force10 Enterprise-specific SNMP TrapsCommand Option Trap
