Private VLANs | 707• show vlan private-vlan mapping: Display the primary-secondary VLAN mapping. See the exampleoutput from the S50V, above, in Figure 33-6.• Two show commands revised to display PVLAN data are:• show arp• show vlan: See revised output in Figure 33-7.Figure 33-4. show vlan private-vlan Example Output from C300Figure 33-5. show vlan private-vlan Example Output from S50VFigure 33-6. show vlan private-vlan mapping Example Output from S50VIn the following screenshot, note the addition of the PVLAN codes — P, I, and C — in the left column:Figure 33-7. show vlan Example Output from S50Vc300-1#show vlan private-vlanPrimary Secondary Type Active Ports------- --------- --------- ------ ------------------------------------------4000 Primary Yes Gi 0/0,23,254001 Community Yes Gi 4/0,234002 Community Yes Gi 4/24,474003 Isolated Yes Gi 0/24,47S50-1#show vlan private-vlanPrimary Secondary Type Active Ports------- --------- --------- ------ ------------------------------------------4000 Primary Yes Gi 0/3,254001 Community Yes Gi 0/4-54003 Isolated Yes Gi 0/6S50-1#show vlan private-vlan mappingPrivate Vlan:Primary : 4000Isolated : 4003Community : 4001S50V#show vlanCodes: * - Default VLAN, G - GVRP VLANs, P - Primary, C - Community, I - IsolatedQ: U - Untagged, T - Taggedx - Dot1x untagged, X - Dot1x taggedG - GVRP tagged, M - Vlan-stackNUM Status Description Q Ports* 1 Inactive100 InactiveP 200 Inactive primary VLAN in PVLAN T Gi 0/19-20I 201 Inactive isolated VLAN in VLAN 200 T Gi 0/21PVLAN codes
