108 Advanced iDRAC6 ConfigurationConfiguring Terminal Mode1 Expand the System tree and click Remote Access.2 Click the Network/Security tab and then click Serial.3 In the Serial page, click Terminal Mode Settings.4 Configure the terminal mode settings.See Table 5-11 for description of the terminal mode settings.5 Click Apply Changes.6 Click the appropriate Terminal Mode Settings page button to continue.See Table 5-12 for description of the terminal mode settings page buttons.Table 5-11. Terminal Mode SettingsSetting DescriptionLine Editing Enables or disables line editing.Delete Control Select one of the following:• iDRAC outputs a characterwhen or is received —• iDRAC outputs a character when or is received —Echo Control Enables or disables echo.Handshaking Control Enables or disables handshaking.New Line Sequence Select None, , , , ,or .Input New LineSequenceSelect or .Table 5-12. Terminal Mode Settings Page ButtonsButton DescriptionPrint Print the Terminal Mode Settings page.Refresh Refresh the Terminal Mode Settings page.
