Using the iDRAC6 Configuration Utility 30117Using the iDRAC6 ConfigurationUtilityOverviewThe iDRAC6 Configuration Utility is a pre-boot configuration environmentthat allows you to view and set parameters for the iDRAC6 and for themanaged server. Specifically, you can:• View the firmware revision numbers for the iDRAC6 and PrimaryBackplane firmware• Enable, or disable the iDRAC6 local area network• Enable or disable IPMI Over LAN• Configure LAN parameters• Enable or disable Auto–Discovery and configure the Provisioning Server• Configure Virtual Media• Configure Smart Card• Change the administrative username and password• Reset the iDRAC6 configuration to the factory defaults• View System Event Log (SEL) messages or clear messages from the log• Configure LCD• Configure System ServicesThe tasks you can perform using iDRAC6 configuration utility can also beperformed using other utilities provided by the iDRAC6 or Dell OpenManagesoftware, including the Web-based interface, the SM-CLP command lineinterface, and the local and remote RACADM command line interface.
